Zeus-Link Gauge Interface Module - GM OBDII ECUs

Connects to GM OBDII port

An all-inclusive gauge interface unit. Reads vehicle data from CAN BUS to drive any Classic Instruments gauges accurately. See additional part numbers for compatibility with Holley ECU’s: Sniper (24-958B) and Sniper II (24-958C)

Additional Features

- System queries vehicle upon installation to determine what list of parameters can be obtained from the vehicle and used as inputs to gauges
- Spaces for 6 standard gauges: speedo, tach, fuel, oil, volt, temp, and 2 auxiliary gauges of the customers’ choosing
- All instruments can be driven traditionally through proper senders if vehicle ECU does not support an output the driver wants to monitor
- Set up and managed all through an app available on the App Store® or Google Play®
- The app is used to configure by choosing which gauges a customer has in the dash and how each gauge gets its signal
- The app has a virtual gauge screen, aligning with the dash instruments
- The app has easy diagnostics, displays values being received by Zeus-Link and will allow user to cycle gauges to predetermined positions, to verify    correct outputs and wiring
- Warning and check engine light outputs on the Zeus-Link and external contacts to light a dash light
- Dash light connection
- All gauge connections to Zeus-Link (power, ground, signal, dash lights)
- Additional resistor dongle available if needed to use multiple Holley CAN devices on the same harness
- Harness plugs direct into Zeus-Link and then to Holley ECU or OBD
- Holley harness has additional Holley ECU connector for other devices
- On-board diagnostic lights give status of power, BLE, and data on the circuit board for Zeus-Link
- Pass-through CAN port connection for other CAN devices
- Compatible with all Classic Instruments sending units and gauges

For complete installation and compatibility information please view the installation manual.

Download the app from Google Play or the App Store.